BYSS 1200 Watt Artificial Snow Machine

• Low and High output settings (variable output)
• Cordless remote for easy ON/OFF
• Small/large flake options for "lighter" or "heavier" snowfalling effects
• Mounting arm included for attachment options

• 1200 Watt Artificial Snow Machine
• 110V Standard Power Cord
• Wireless receiver adapter & remote
• Attachment arm bracket & hardware

• SIZE: 20"x 10"x 12" (52x26x30cm)
• NOISE: 69.2 dB at 10' from machine - can be compared to the sound of a typical hairdryer
• WEIGHT: 13.7LBS (6.2KG)
• TANK SIZE: 1.3 GAL (5 L)

• Q: How long will one 32oz solution concentrate bottle last?

A: It will last 30 - 60 min depending on how much water you add + if you run the machine continuously.

• Q: How long will the flakes stay on the ground?

A: The flakes will last on the ground or other surfaces anywhere from 5 - 30 minutes. This will depend on how much water is added to the solution (more water = less time) and the temperature. Over time, the fake snowflakes will evaporate and disappear.

• Q: How far will the machine shoot the flakes? (1200 Watt Version Only)

A: This will depend on the angle and consistency of the solution. On average, the shooting distance from the machine will be about 20-40ft. The width coverage will be approximately 10-15ft. We recommend setting up the machine in a high location to get the maximum area coverage!

BYSS Snowmaking Fluid is non-toxic and safe to use. BYSS fluid itself is evaporative and won't leave any mess or stains. BYSS Snowmaking Fluid is sold as a concentrate and only requires distilled water (not included).

A 32oz BYSS Snowmaking concentrate will make approximately 2.5-4.5 Gallons of snowmaking fluid. 32oz concentrate can be mixed with 2-4 gallons of distilled water depending on the desired flake size. Start with 2 gallons of distilled water and add more water to create "lighter" looking flakes. One 32oz concentrate will last for 30min-60min if the snow machine is being used continuously. The amount of fluid that will be used will depend on the output settings and flake size.