Cold Front Snow Gun

• Anodized Aluminum Construction (CNC Machined Parts)
• Stainless Steel Misting Nozzles
• Specialized Internal Components (rated for high pressure water and air)
• Standard Quick Connect Fittings (for air and water connections)
• Inline High Pressure Water Filter (extra filter to remove any particulates from entering snow gun)
• Commercial Nucleation Nozzle (customized to optimize ice crystal formation and snow production)
• Air Check Valve (eliminates water back-flow into air hose)

• Cold Front Snow Gun
• Tripod Stand (360 degree tilt options)
• Additional Aluminum Mounting Brackets (variable mounting options)
• Stainless Steel Full Range Nozzle Pack (misting nozzles for any pressure washer or pump up to 10 GPM)
• Low Pressure Water Filter (150 Mesh)
• Blow Out Tools (high pressure & low pressure)
• Pressure Gauge (used for monitoring snow gun operation pressure)
• Instruction Manual & Detailed Video Instructional Library

FULL SIMPLE PACK Items:

• 10ft Rubber Air Compressor Hose
• 25ft Rubber Pressure Washer Hose
• Pressure Washer Adapter Fitting Pack - (3/8" FNPT, Male M22 & Female M22 Fittings)

*Pressure Washer and Air Compressor NOT Included. Full Simple Pack includes all items needed to make snow except the air compressor and pressure washer.

• AIR COMPRESSOR

(1) Air compressor is required with the Cold Front Snow Gun. The Air Compressor must be rated at least 5 CFM @ 90 PSI to work properly. Recommended compressor size is between 5-6 CFM @ 90 PSI. Compressors rated greater than 6 CFM @ 90 PSI will work, but will not improve snow quality.

• PRESSURE WASHER or HIGH PRESSURE WATER PUMP

The Cold Front will work with any pressure washer or high-pressure pump that can produce at least 1000 PSI. You can also use multiple pressure washers/pumps in a "Train System". The Cold Front Snow Gun will work with any pressure washer(s) rated up to 10 GPM (gallons per minute). The optimal flow rate range for the Cold Front is between 5-10 GPM.

• HIGH FLOW WATER SOURCE (more than pressure washer GPM)

When using larger pressure washers, you will need a water source than can supply more water. Make sure your water source can output more GPMs than your pressure washer(s) or pump(s).

• FREEZING TEMPERATURES

The Cold Front Snow Gun requires freezing conditions to produce real snow. For more information about snowmaking temperatures Click HERE

The amount of snow produced will be determined by the pressure washer/pump GPM (gallons per minute) rating. 5 GPM = 5" per hour of snow production. 6 GPM = 6" of snow per hour, etc. The Cold Front Snow Gun can handle up to 10 GPM of water flow from the pressure washer(s). The approximate area coverage for the Cold Front Snow Gun is 20' x 80'.