Cold Front Train Packages

• Anodized Aluminum Construction (CNC Machined Parts)
• Stainless Steel Misting Nozzles
• Specialized Internal Components (rated for high pressure water and air)
• Standard Quick Connect Fittings (for air and water connections)
• Inline High Pressure Water Filter (extra filter to remove any particulates from entering snow gun)
• Commercial Nucleation Nozzle (customized to optimize ice crystal formation and snow production)
• Air Check Valve (eliminates water back-flow into air hose)

• *Engineered Combination Manifold (rated for 5000 PSI)

*DO NOT attempt to use multiple pressure washers without an engineered manifold with properly sized check valves

• Cold Front Snow Gun
• Tripod Stand (360 degree tilt options)
• Additional Aluminum Mounting Brackets (variable mounting options)
• Stainless Steel Full Range Nozzle Pack (misting nozzles for any pressure washer or pump up to 10 GPM)
• Low Pressure Water Filter (150 Mesh)
• Blow Out Tools (high pressure & low pressure)
• 25' Rubber Pressure Washer Hose (great in cold temperatures)
• 10' Rubber Air Hose (great in cold temperatures)
• Garden Hose Split Connector
• Snow Gun Pressure Gauge
• *High Pressure Combination Manifold (Industrial grade SS Check Valves for each inlet port)
• *Pressure Washer Adapter Fitting Packs
• *Garden Leader Hoses
• Instruction Manual & Detailed Video Instructional Library

* Double Train = qty2, Triple Train = qty3, Quad Train = qty4

Pressure washers and air compressor NOT included

• AIR COMPRESSOR

(1) Air compressor is required with the Cold Front Snow Gun. The air compressor must be rated for at least 5 CFM @ 90 PSI to work properly. Recommended compressor size is between 5-6 CFM @ 90 PSI. Compressors rated greater than 6 CFM @ 90 PSI will work, but will not improve snow quality.

• PRESSURE WASHER(S)

The Cold Front will work with any pressure washer that can produce at least 1000 PSI. The Cold Front Snow Gun will work with any pressure washer or combination of pressure washers rated up to 10 GPM (gallons per minute) of water flow. You have the option to use multiple pressure washers, but can always use a single pressure washer or large pump to start out.

• HIGH FLOW WATER SOURCE (more than pressure washer GPM)

When using larger pressure washers, you will need a water source that can supply more water. Make sure your water source can output more GPMs than your pressure washer(s) or pump(s).

• FREEZING TEMPERATURES

The Cold Front Snow Gun requires freezing conditions to produce real snow. For more information about snowmaking temperatures Click HERE

The amount of snow produced will be determined by the pressure washer or pump GPM (gallons per minute) rating. If you use multiple pressure washers, then it will be determined by the total combined flow rate. 5 GPM = 5" per hour of snow production. 6 GPM = 6" of snow per hour, etc. The Cold Front Snow Gun can handle up to 10 GPM of water flow from the pressure washer(s). The approximate area coverage for the Cold Front Snow Gun is 20' x 80'.